Furniture Manufacturing
Machines for Furniture Manufacturing.
CNC routers, six-sided drilling machines, edge banding machines and beam saws for panel-based furniture production, from made-to-order workshops to serial factories.
How is panel furniture produced?
Most modern furniture, from office desks and storage units to wardrobes, beds and shelving, is made from panels such as chipboard, MDF and plywood, often with a laminated or veneered surface. Panel furniture production follows four core steps: cutting full sheets into parts, edge banding the visible edges, drilling holes for connectors, hinges and shelf pins, and assembly or flat-pack packaging. AXTEA supplies a machine for each of these steps and integrates them into one production flow.
Which AXTEA machines are used in furniture manufacturing?
| Production step | AXTEA machine | What it does |
|---|---|---|
| Cutting and shaping | AX-N 200 CNC router | Nesting: cuts, drills, grooves and shapes parts from full sheets in one program |
| High-volume sizing | AX-B 200 beam saw | Beam saw for large volumes of rectangular parts, with optional automatic rear loading |
| Edge banding | AX-E 300 and AX-E 100/200 | Fully automatic and compact edge banding machines |
| Drilling | AX-D 100 and AX-D 200 | Six-sided CNC drilling, routing and grooving in a single setup |
Office furniture and home furniture
Office furniture production typically involves larger series of desks, cabinets and storage units with repeating dimensions, which suits beam saw cutting, fully automatic edge banding and six-sided drilling for connector holes. Home furniture, such as wardrobes, bedroom and living room furniture, often combines standard parts with made-to-measure pieces, where a nesting CNC router handles variety and shaped parts. Many factories use both approaches; our article on nesting vs. traditional panel cutting explains when each fits.
What matters when choosing machines for furniture production?
- Product mix and batch size: many different parts favour nesting; repeating sizes favour beam saws.
- Edge quality: visible edges need clean pre-milling, gluing, trimming, scraping and corner rounding.
- Drilling accuracy: connector and hinge holes must match across parts so furniture assembles without rework.
- Software: AXTEA machines work with CAD/CAM programs such as Alphacam, Cabinet Vision, NC Hops, Mozaik, KCD and TopSolid.
- Material flow: the layout between cutting, edge banding and drilling determines how much handling each part needs.
AXTEA plans the machine layout within your production area as part of its installation and training service, and supports production afterwards with remote service, spare parts and planned maintenance.
Frequently asked questions
What machines do I need to start panel furniture production?
At minimum, a machine for cutting (a nesting CNC router or a panel saw), an edge banding machine and a way to drill connector holes. A nesting CNC router with a drilling unit can cover cutting and most drilling in one setup.
Can one production line make both office and home furniture?
Yes. The same cutting, edge banding and drilling machines process the panels used in both; the right configuration depends on your volumes and how often products change.
Does AXTEA plan complete furniture production lines?
Yes. Beyond individual machines, AXTEA integrates machinery, automation and material flow into unified production systems, from single cells to complete lines. Contact us with your product range to discuss a layout.
